Posted by E.J. Bowen (IP: 209.240.200.13) on January 13, 2000 at 17:40:19:
In Reply to: Re: Steering linkage question posted by Todd on January 13, 2000 at 17:15:24:
: : I'm switching my car over to manual steering for drag
racing. I know the steering box ratios are different, but
I'm not worried about that. I know I need the center link,
but do I need the pitman arm, idler arm or anything else.
Has anybody done this or know what I need. I am also
looking for the parts needed. Any out there? While I'm here
this is some other parts I'm looking for; Thottle cable for
302. The upper metal dash with no a/c, radio or any holes
cut in it, plain as they come. Gas cap. Thats it for now.
Thanx E.J.
: : Just did one, you need both the center link and pitman
arm. Got a new center link from PST. Found a Maverick in
the salvage yard got whole assembly off. I still have the
center link if your interested. Idler arm is ok to use.
Had same problem with throttle cable, used 6cyl cable by
cutting to length at gas pedal and using brass cable stop
on end. Have a 75 Mav used for drag racing and a 74 Mav
used for street rod, both are 302's. Will be glad to help
out in your project with any info I can.
Is that the new or used center link you have left and how much? You can e-mail me at WarriorPro@webtv.net