Re:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Charlie (IP: 131.204.141.69) on January 21, 2000 at 02:41:20:

In Reply to: It's good to get the radiator as well.... posted by T.L. on January 21, 2000 at 00:50:20:

Yes, if you can get the whole car, there are many things you should get, such as engine crossmember and sway bar, I was hoping it wasn't manual trans, but thanks, I knew I forgot sumthun. -CP


: And if it is a manual transmission, you also need a V-8 bell-crank or "Z-bar"...

:
: : You need frame mounts from a V8 car. This is the only "must" requirement, but without V8 springs your car will sit too low. Without a V8 transmission crossmember your exhaust will be comprimised. Without a V8 rearend you may break axles. Along with the 302 you will need a flexplate or flywheel, as the 6-cyl one will not work.

: : Basically, you should find a V8 Maverick in a junkyard, and transfer springs, mounts, crossmembers, and suspension over. This is the best way to do the swap. -CP

:
: : : Could someone tell me what I need to do in order to put a 302v8 into a 1970 6 cyclinder Maverick?

: : : Thank you in advance.
: : : Sincerely,
: : : Andrew J. Farrar





Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]