Posted by Bill Shepherd (IP: 199.174.136.137) on July 19, 2000 at 01:21:57:
In Reply to: the verdict posted by rickyracer. on July 17, 2000 at 23:34:49:
: Why don't you just ship it to me, I'll put it in my Maverick. Or is your's different from everyone else's that has a 351W in it. Sell the 8.8" and get a beefed up 8" or new 9". So what if it was free, maybe there is a good reason they wanted to get rid of it. If the engine and trans require all this trouble what else is left? You haven't even checked the throttle linkage, raditor hoses, wiring, heater hoses, etc.
: So have you talked yourself out of this swap yet? I put a 460 into my 82 Merc Zephyr with a C-6, headers and a 9" back in 92. Before it was a common thing. Quit your whining and start wrenching.
::Rickyracer is right, you and your freinds get busy and get it done.I'm doing the sme swap,351W ,c-4, 3.55 8". You are worried about the engine swap when the rear end is the bigger headache.If your car is high milage chances are the shock towwers have sagged.Bill
: : i measured everything out and it will not fit in between the shock towers. i need about 3-4 inches on both sides. will i be able to get them hacked up enough at a shop to be able to fit this block in with the headers?
: : also the rear i know it is going to need mods to fit into my 72, but what do these mods entail? i got my 8.8" for free, so i wanna use it.
: : otherwise everything else looks like it is going to line up and bolt in. i was hoping that today would be the day to drop this in, but apparently i am going to have to wait a little bit longer. maybe another week or two. thanks for all you input and help.