Posted by Earl (IP: 216.78.39.41) on June 04, 2000 at 20:27:12:
In Reply to: Re: Crossmember Q.... posted by T.L. on June 04, 2000 at 15:33:02:
Paulie; I used a '74 Comet for a donor car, and the crossmember will fit,
but you have to do a little modifying to it. You need to cut a but out
of the drivers side slot to allow it to swing in, and elongate the bolt
holes a bit to get it to bolt up. You really need this item if you are
going to run dual exhause. Just use a bit of patience and a ZiZ wheel, and
it should go fine. Good luck!!!