Posted by Charlie (IP: 172.133.47.227) on June 05, 2000 at 19:19:52:
In Reply to: Re: Crossmember Q.... posted by Earl on June 04, 2000 at 20:27:12:
: Paulie; I used a '74 Comet for a donor car, and the crossmember will fit,
: but you have to do a little modifying to it. You need to cut a but out
: of the drivers side slot to allow it to swing in, and elongate the bolt
: holes a bit to get it to bolt up. You really need this item if you are
: going to run dual exhause. Just use a bit of patience and a ZiZ wheel, and
: it should go fine. Good luck!!!