Posted by Mavman (IP: 204.181.93.138) on March 12, 2000 at 02:03:25:
Got it all done a few days ago, with my brothers help. Wasn't really that hard. Used the old drum/drum prop valve, changed the master cylinder, new rotors, calipers, hoses, pads, bearings, and seals. Took all day, but most of that was cleaning everything up. The only hard part was building the ONE brake line for the rear brakes from the master to the prop, drilling a few new holes to clamp the lines to the frame,and also routing the disc metal lines in place of the drum metal lines.
For those who wanna know...there is a union fitting under the charcoal canister that allows easy pulling of the passenger side line.
Hopefully, soon I will be adding a new page to the "Current Mods" on my web site to show what we went through. Stay tuned.