Posted by Mavnetic (IP: 209.240.216.83) on March 13, 2000 at 21:35:00:
In Reply to: Re: Subframe connectors ? posted by rickyracer on March 13, 2000 at 20:38:59:
: :don't know of anyone that makes a set, but you can have them made yourself, just measure the lenght you want and get 2" square tubing with some 1/8" plating. Take it to a weld shop and they can build them for you from there. If you have a probable welder even easier. The steel is pretty cheap. Weld them in place, bolting will work loose after awhile which will mean retighting them.
: If you're going to be banging some gears make sure and insp the rear body pieces for any cracks/rust that might be developing. You never know on unibody construction.
: "m getting ready to put in a 9" rearend and was looking at the under side, was wondering about subframe connectors. Wanted to ask what is the best way to go, bolt on or weld on? And were I can get a good set.Thanks for any info.