Posted by Mark Griffith (IP: 152.163.206.187) on November 22, 1999 at 22:31:18:
In Reply to: I cut mine.. posted by Mavman on November 21, 1999 at 22:56:38:
After replacing the 73 big front bumper with a 70 fiberglass bumper, changing to fiberglass fenders, hood, stone guard, front valance and putting the battery in the trunk, I had to cut about three-forths of a ring off and now the car sits perfect and still rides well.
: WHATEVER YOU DO!!!! CUT SMALL AMOUNTS!!!! I wasted a good set of springs. I cut a full ring off, and it dropped it roughly 3 inches. Had a spare set, and cut half a ring. Brought it back up 1-1.5 inches. Half should be good, in my opinion.
:
: : Hello , after all the modifications to my car the front end it too high(using Mustang coils) I am going to cut alittle off but I need some advice so I don't cut too much.The front is about 2 inchs too high , I was thinking 1/2 of one coil ring, this sound about right? Thanks for any info