Posted by Mavman (IP: 192.62.107.213) on November 23, 1999 at 08:01:02:
In Reply to: I also cut mine.. posted by Mark Griffith on November 22, 1999 at 22:31:18:
I've considered a glass front bumper, but never heard of a glass front valance.
: After replacing the 73 big front bumper with a 70 fiberglass bumper, changing to fiberglass fenders, hood, stone guard, front valance and putting the battery in the trunk, I had to cut about three-forths of a ring off and now the car sits perfect and still rides well.
:
: : WHATEVER YOU DO!!!! CUT SMALL AMOUNTS!!!! I wasted a good set of springs. I cut a full ring off, and it dropped it roughly 3 inches. Had a spare set, and cut half a ring. Brought it back up 1-1.5 inches. Half should be good, in my opinion.
: :
: : : Hello , after all the modifications to my car the front end it too high(using Mustang coils) I am going to cut alittle off but I need some advice so I don't cut too much.The front is about 2 inchs too high , I was thinking 1/2 of one coil ring, this sound about right? Thanks for any info