Posted by Charlie (IP: 172.166.169.161) on December 26, 2000 at 11:13:19:
In Reply to: Re: fix it... posted by Arnold H. Lester Jr. on December 26, 2000 at 00:59:44:
I was talking about the Z-bar... You should be able to find the bushing at any Mustang shop. Its the big one I believe (2 sizes are available). Get 2 and replace the one on the frame too. To do this, remove the two 9/16 bolts from the frame bracket right behind the steering box (don't look for them FEEL for them ;) ) Then slide the bracket out of the Z-bar and the Z-bar will be loose. Since I don't use a stock Z bar I don't know if you'll need to seperate the 2 pieces of yours or not to remove it totally. -CP
: The bushing where it mounts to the engine block is shot.This is where it pivots as you push and release the clutch pedal.How do you fix it?Thanks, Arnie.