oil restrictors

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ]

Posted by rickyracer (172.143.184.93) on January 23, 2001 at 01:04:05:

In Reply to: this is a post for the Ken that replied to oil restrictors posted by Chris S. in Denver on January 23, 2001 at 00:30:54:

actually the Hyd Cams need a bigger hole to keep the lifters pumped up. Better way is to use the 4 restrictors for the cam bearings and use pushrods with smaller oil holes to minimize the oil to the rocker arms. The factory pushrod holes are way to big.

: Hey Ken, does the cat say weather or not that is the one for the hydrolic cam or the mechanical cam. The diff being the size of the hole.
: Hyd cams need a smaller hole than the mech. They used to sell just the right side as a kit about 4 years ago because the right side has the big build up. Any way if it says, let me know.

: BTW thanks for the nimfo, I mean Info

: Chris

Follow Ups:

no need too do that, rickyracer 01:34:02 01/24/01 (0)
Bowning down gracefully and apoligizing I was wrong! Chris S. in Denver 00:51:44 01/24/01 (1)
Exacly opposite. Chris S. in Denver 11:46:02 01/23/01 (2)

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: actually the Hyd Cams need a bigger hole to keep the lifters pumped up. Better way is to use the 4 restrictors for the cam bearings and use pushrods with smaller oil holes to minimize the oil to the rocker arms. The factory pushrod holes are way to big. : : : Hey Ken, does the cat say weather or not that is the one for the hydrolic cam or the mechanical cam. The diff being the size of the hole. : : Hyd cams need a smaller hole than the mech. They used to sell just the right side as a kit about 4 years ago because the right side has the big build up. Any way if it says, let me know. : : BTW thanks for the nimfo, I mean Info : : Chris

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ]