Posted by Dennis (IP: 152.163.201.207) on October 09, 2000 at 07:34:56:
In Reply to: elec. ig. distributor? posted by Fastman on October 09, 2000 at 02:23:38:
You still need the module for this to work. Easiest way is go to a junkyard & get the wiring harness, coil, & module. The wiring harness will plug the coil, dist, & module all together. The only thing left will be a 2 pin plug from the module. Take both wires (one red & one white) tie them together with a switched 12v line & it will work great.