Posted by Fastman (IP: 209.179.228.243) on October 18, 2000 at 19:43:27:
In Reply to: I/6 200 motor rebuild help posted by Steve-S on October 18, 2000 at 13:38:21:
Your cyl. head should be good since it shouldn't have many miles on it, and if you are very careful you can get away with rebuilding the engine for around $600 as a safe rebuild(not going with cheap parts but not the best either). That is assuming you don't have the head done, but DO have the crank and rods checked by a machine shop, along with the block being checked, cam bearings, freeze plugs installed and bore and hone job. If this sounds good, repost here and I will give you the kit number from PAW that has pistons, cam etc.