Need help. Have a couple of questions about converting from a 3 sp. to a C4

Posted by Mike S. (IP: 152.163.197.192) on October 03, 2000 at 23:07:26:

1. Is the actuating rod for the master cylinder the same size from a 3 pedal system to a 2 pedal system. I have a '76 mav. that had a 3 spd. in it, converting to a C4. Using a 2 pedal system from a '72 Grabber. Are they the same? I would reuse the rod from the 3 pedal system.
2. What all do I need to do to eliminate the shifter linkage from the steering column? Can I gut it out. I heard somewhere that you need to wiring up a switch. What switch, where?
3. Is the driveshaft and trans mount. the same?
Any help to any of these questions is much appreciated. If you've done this conversion, please email me with your experience and tips.
Thank you!!

Follow Ups:

• Don't need to change entire pedal assy.. Charlie (IP: 131.204.141.38) 10/04/00 (0)
• Re: Need help. Have a couple of questions about converting from a 3 sp. to a C4 Del (IP: 63.21.215.141) 10/04/00 (0)
• Re: Need help. Have a couple of questions about converting from a 3 sp. to a C4 Craig Selvey (IP: 209.212.220.94) 10/04/00 (0)
• Re: Need help. Have a couple of questions about converting from a 3 sp. to a C4 rickyracer (IP: 209.20.170.18) 10/04/00 (1)
  • to add to RR's info Dennis (IP: 152.163.201.197) 10/04/00 (0)

Post a Followup