Posted by Steve-S (IP: 24.28.68.29) on September 16, 2000 at 19:31:18:
In Reply to: Re: Need Steering Column help posted by Craig Selvey on September 16, 2000 at 18:40:32:
Yes. That's the one. I have the circlip off but can't get that collar off. Any ideas?
Steve-S
: --------------------------------
: Are you trying to remove the "collar" on the steering column? the one that has the ignition in it?
:
: ==================================
: : I have the stearing wheel off and the wiring harness out. I have the ignition lock out of the column (part key goes in). I have the snap ring off. I can't get the bearing off to get the ring that holds the key part off so I can replace the spring behind the column mounted shifter arm. It appears to be pressed on. Do I need to loose up the column in the engine compartment to pull it out some? If so how would I do this? My book doesn't go into getting this deep in the steering column and I'm stumped.
: : All help appreciated.
: : Steve-S