Frt spring ID Anyone know the application for these and the rating? DAV D4DW- 5310DA Thanks
hose This is a symptom of another issue as noted above. Check pump operation, t-state and rad cap. This should not happen... JMO
pitman A little heat form a handheld propane torch along the os of the nut will loosen it quickly. The puller should not need beating on. Put a...
damn - that place is expensive !!!!
no boss there Sorry- no screw in freeze plugs exhaust prots are wrong shape ...too rectangular.
tape If you're using the blue plastic type tape , it may help to give it a "bit" of strech as you try to make the turns. Also a heat gun lighly...
cam Follow exactly the cam manufacture's recommendations. And use their break in lube!! In fact order 2 qrts and use the second one for the first...
shake U-joints for me also as a first look. Check it with the rear end on jackstands and see if you get the shake. Will probably be less than on...
convertor And remember that a cooler is really an important addition when going to a higher stall convertor. An easy way to make a determination...
self inflicted wound decent compressor that has enough storage and CFM to do body and paint work 700.00 electrical work -300.00- to get it to...
on your way Good start- but I have a suggestion...get rid of that plastic cover, you're creating rust starting moisture under there in places you...
There are aftermarket kits available for a rear window defogger. try google..maybe
I think I'm going to rebuild my motor. Too many problems recently with blown head gaskets, leaking intake gaskets , etc. Trouble is I'm not sure...
balancer Dampner and flexplate/flywheel can be purchased separately. hell NAPA can probably get you both if your not real concerned about top...
stroker Just a few trips to the track, mostly just Fri nite cruising. Probably would stay with a 332 and 8.5-9.0 CR. Don't want to get too...
Daddad Better heads than the Trick Flow Trach heats??? Any suggestions? Thanks
Hey guys - I have a 94 5.0. GT heads and am considering building a stroker to use with my current blower set up. Does this engine have a cast or...
Tie it thru the strut to cowl brace holes w/a clothes hanger
bumpers If they are good quality , fit and finish..I would certianly buy both!
trim Can you be more specific?? what year car are you working on? 2 dr or 4 dr? are you speking of the chrome that is on the door window frames?...
Separate names with a comma.
