Dan, the words of wisdom is, don't worry. A trans in first class shape or rebuilt properly will stand up to a lot of punishment. Shift kit,...
Earl, you should use a later model like from a Lincoln Mark 7 after 1988. The tail shaft housing is about 1/2" longer than say a Mustang. They...
You need to consider that the higher pressure capability of the bigger pumps won't be realized unless a higher pressure radiator cap is used....
The reason is these carbs have the idle control system reversed. The needle controls the air not the fuel like the older carbs do. Reason for...
Earl, I would think it would help if the total areas were large enough. One way to test this out is raise the rear of the hood for about a inch...
Some additional things to be awhere of. With a high stall convertor and A/C use, the heat generated by the extra trans slip and the A/C condenser...
If the car is run on a roller to check emmisions then it will fail for NX. These crack and erode from direct exhaust that is ported up through...
Any place that has a large amount of flex out of normal static alignment such as anti roll bar links, using the urathane bushings in a tight...
On pedistal mounts, the rocker arms absolute limit would be the bar mount between two mounting pedistals and depending on the rocker used. The...
Jean, the head stud holes are larger on a 351 block. The 351 block would be wider. The pan size is larger. The outside measurement from head...
dm- Not trying to sprinkle salt in your wounds but there is a lesson to be learned here. Never trust stock rocker studs with aftermarket...
richk, I don't have any photos handy, doing it before I got a digital camera and the car is in another location due to space...
I have been running a rear bar for a number of years and for my driving there is no down side. Depends on how far to the edge any car is pushed...
A new set of advance springs, a timing light, patience, testing and record keeping will fix your problem. You have to much tip in advance. The...
Nothing wrong with using an external pump from an 85-87 pickup and mounted on a bracket just ahead of the stock tank. You still have to run a...
I can tell you with a high amount of certinty that you are not even close to 500 hp with the dyno programs and your specs. We run a 351W with...
Wes is right and I have found the same over the years. Additive could be used to advantage in old worn hi-milage engines that tend to use oil...
Paul you take to much for granted. I never said anything about a C4 in any kind of comparison to the AOD. My trans has all stock internals...
Can I convince you that the AOD is not the pansey trans many think it to be. I run one in my 4000 lb Lincoln Mark VII behind a Kenne Bell...
The proper place to hook an electric choke is the 'Stator' lead of the alternator. The reason is the choke element is not exposed to any voltage...
Separate names with a comma.
