Sorry to hear about your health. Everyone has it right with the resistor wire probably being bypassed. The easy and long lasting fix is to swap...
Correct - no 1970 had 5 lug They look like US Indy - if they are that name is cast into the inside of the wheel Where do you see the Ford Stamp?...
:Welcome: from Wisconsin! Looks like a great find.
Pretty cool. Wonder what the badging looked like and if any still exist.
:Welcome: back to the forum. Send a PM messsage to Stefan to see if your old user account exists. I think I found one of them but it was a closed...
Looks the same to me - front sump, good drain location.
Tiny hands are key to get in there. Go slow and watch out for cutting yourself. Everywhere are sharp edges. Disconnect your battery too. [ATTACH]
Joey, here is a very old thread (but the pictures are still there) of my 72 when I used the smaller Mustang pans to patch in the bad spots in the...
Now THAT is a mancave .......... :cheers:
Surprised it is that high, but shipping is nuts the last couple years. CJ Pony is a good company and I've bought many things from them over the...
Wiper arm is the same as 66-68 Mustang. There are perfect reproduction kits from any of the Mustang parts houses.
If you have to pick one - the halo top is the best of all the vinyl roofs on these cars. Your car looks great!
Ford loved to reuse names and in this case, part codes from different models. Starting in 1975, the D-DZ parts were also used for a Granada The...
The '70 used a tank that was also the trunk floor. All others 71 and up had a real trunk floor and the tank was a separate unit strapped under the...
I don't know this particular car but it looks pretty nice. At least this dealer puts up some decent photos. Marti report proves it is a GT 1971...
I made my own. For each one I set the seats in the car and used shims to get the seats in the exact position and height I wanted them. Then...
Local auto parts store should be able to get them too - DORMAN 74351
C3AZ is for 1963 and that is around the time, when the Ford small block V8 like yours first came out. If it is 157 tooth 28oz external balance...
They have to be in there to hold the shoes in place. But I have seen countless times where for whatever reason, they don't line up exactly with...
No changes on this end - all board settings are unchanged
Separate names with a comma.
