Ya cant even go thru the fast check lane with that many items!
Also that part of the core support where the red arrow is at the bolt, looks like it could be flattened a little for a tiny gain. I think I may...
That looks different than mine too, but it looks like you can trim enough off for pulley clearance.....at least what I see from the pics makes it...
My cowl area was not rusted through anywhere, but was full of crud, and the hats had some rust. I thoroughly vacuumed, flushed as a piece of wire...
Sounds good. A comfortable seat is something creeping up my priority list...well, lots of things creep up it lol, but comfort certainly would give...
That sounds good. what are your plans for it if I may ask?
That is a very nice car, slow or not lol. Does it still have the original rear end ratio + tall rear tires?
I put a "Dynomax super turbo" on my car. I wanted quiet.....but it is not silent. Quiet on the freeway. Quiet above 35 for the most part. But the...
I think the method used in the pic requires the entire dash removed, and the windshield. There are other methods to take care of cowl leaks...
metric threaded belly bar bolt with angle ground nut. Fits in a 74
Although I have never heard of such, it sounds fitting. As much as I hate vinyl tops, if I had a car with your scheme, I probably wouldnt change...
Wood screws? I guess they didnt have drywall screws handy. :rofl: Sorry, thats the first thought that popped into my head.
Welcome from Portland OR. Quit horsing around Frank!
Just today I was asking myself why on all 3 of the vehicles I use, none has a working horn.....and they cant be too hard to fix....lol.
Lol....I havent been to through the staging lanes yet, but I think the ol junk motor has got a 13.xx pass in it if I dont waste too much time...
I took mine to a radiator shop that charged me 90$ and gave it back still rusty and dirty. all they did was soak it a little and solder up some...
When I installed it, the temp. sensor was put in the T-stat housing. I assumed (there is that word again, lol) that cooling the radiator after...
I was going to use 3 colors. I have a switch in the relay ground that I use to turn the fan off. I would run a 12v through one LED that would...
I had to trim my shroud to get that fan in with a stock 3 core radiator. I have less than a 1/4 " clearance, and the paint gets rubbed off the...
That car certainly was beautiful, and had an envious list of upgrades. However, if the red flags were concerning, especially at that price point,...
Separate names with a comma.
