Thanks... :tiphat: The color changes as the lighting changes and/or moves. I'd like to think we're the first Mav/Comet with an orange pearl paint...
Fresh out of the paint booth, with some close ups of the paint. Keep in mind that the car still needs to be wet sanded and buffed. [ATTACH]...
I'm at the shop now. We're going to use rivnuts. Also, since the doors haven't been painted yet. We're moving the mirrors forward to the same...
The body shop manager is telling me that they just use screws going straight into the sheet metal and they've never had a problem. I'm headed to...
I figured well nuts would do the trick. But I can also see where using a stainless screw directly into the hole would work, too. You're right,...
Thanks for the advice so far! I'll definitely go with stainless screws. Here's my situation... I drilled 1/8" starter holes that line up with...
Hey all... Is anyone using non-factory screws and nuts to secure their side sport mirrors? I'm more concerned about any reasons to 'not' use...
If you drop that boat anchor (large front bumper) and convert to the smaller bumper, you can go manual to lose some weight and gain a few horses.
Definitely a bad u-joint. There's a good chance that it's both!
Thanks for the info! :tiphat: Has anyone here used the outer brackets?
Sorry to revive this old thread. But is it true that Mustang brackets will work for a rear small bumper swap? More specifically... we've got a...
If you think waterless antifreeze is high tech, check out my new cordless Bluetooth lawn sprinkler...
We went with a Spaal electric fan. No regrets here! :thumbs2:
The Magic Pumpkin... The drummer in my band gave it this name and it just stuck.
Thanks, we appreciate that. Yeah, the cost jumped up a LOT since last summer. We got ours directly from the eBay store that goes by...
The adhesive comes with the dash cap, straight from the manufacturer. You just need to rough up the old vinyl dashboard with sandpaper (we used...
We went with the plastic dash cap. It was $58 + shipping on eBay. It took about 30 minutes from start to finish. I'll let you be the judge on how...
Ok, so looking at the comparison picture, it looks like the main difference is the bend angle at the end of the bumper. One is more "V" shaped,...
I can't post the pics, so you'll have to Google them for comparison. But to me, the rear bumper of the 1971 thru 1973 Mustangs look exactly like a...
That car has been on and off Craigslist for the past 18 months. Me thinks it would be better off crushed and turned into a few hundred shiny new...
Separate names with a comma.
