way back from 2013.......... http://mmb.maverick.to/threads/performance-sway-bar-1-1-8.91704/ there maybe a few members out there who may sell...
Top bolt is a larger fastener, uses 3/4" socket and lower uses 5/8" socket.......personally, I would just take torque value in the middle, 105...
This is from Ford Shop Manual: Anchor Plate to Spindle - Upper 90-120 ft/lbs. this must be tightened first...
see post starting from #710, Tody (Thomas) has an excellent write up/pictures..........
Front eye's where the same size RB82, it was the rear shackles, Mustangs 65-70 where 1 3/8" and on our Mav/Comet where 1", which where same size...
alignment specs........ https://opentrackerracing.com/technical/ David
Everett: I use thread sealant on the bolts going into the water passages, think there are 4, all others I use anti-seize or you can just use...
This one? https://www.ebay.com/itm/362124864216?hash=item545052ead8:g:a~gAAOSwLiJZ1SrM David
You can use an adapter.......... https://www.ebay.com/itm/122361236264?hash=item1c7d4c4b28:g:fqkAAOSw4CFYqK-Z&vxp=mtr David
Everett: As mentioned by member earlier, 4 bolts that secure the bottom of cover, 2 are 1/4" (use 7/16" socket) and 2 are 5/16"(use 1/2" socket),...
What about the Thermostat housing? I have had problems before with it leaking, finally got one with "O-ring" and that solved my...
Here is some info that may help........... http://mmb.maverick.to/threads/anyone-tried-the-hooker-7405hkr-headers.121378/#post-1150688 David
MOOG K8103 David
This will fit stock 14"............ https://www.ebay.com/itm/181951874311?hash=item2a5d2d4507:g:qL4AAOSwWfda~JrF David
Never knew that there was a 2 groove water pump pulley, personally I would stay with single groove water pump and go with 2 groove crank/damper,...
You are looking for a 2 groove pulley for the crank/damper, I think water pump pulley are only single groove, also if you have a 302, then you...
Check your front drum hub/rear axle size, on our Mav/Comets they where either 2.43"(61.72mm) or 2.78" (70.61mm) so any of mentioned rims will not...
First, disconnect the battery, then open the ash tray, push down on upper tab to release the ash tray, then you can get behind to the cigar...
He is running his back up lights on the rear valance, just like on early Mustangs........... David
Contact Nick, he can make up any new brake line for you..... David...
Separate names with a comma.