Gap between shroud and radiator is now about 3/8 inch at the closest point on either side of the radiator cap. I'm curious as to how this compares...
Thanks. I actually just changed to an ACP radiator with a wider top tank (3 3/8 inches) which narrowed the gap between the top tank and the shroud...
could you measure the width of your top tank and let me know. I found engineering number D0DE-8146-B on the shroud so I'm thinking that you are...
I can't find a part D0DE-8146-B engineering number on the shroud. Definitely a Maverick/ Comet shroud.
I have a question concerning fan shrouds. My 1971 Comet Gt 302 ( non AC) fan shroud fits close to the radiator at the bottom but has a gap of...
Does anyone sell concours ink stamped radiator hoses for a 1971 Maverick 302?
Does anyone know which crankshaft pulley is correct for a 1971 Comet 302 with power steering. The car currently has a 3 sheeve pulley which is in...
I actually found an NOS D0DZ-B and then was able to find four D0DZ-A pieces. What is odd is that the A parts are shorter than the B parts and...
I don’t think they are available but you can make your own like I did While back I post this pictures how can be done good luck
Does anyone know of any vendors at the Carlisle Ford event who sell Maverick/Comet parts?
Does anyone know of a source for the cover that goes over the bolts that mount the latch on the tip out rear windows? The original part number was...
Yes, it's squared off and actually has the D0DZ engineering number as well as the D0DZ-2457-B part number embossed on the back side of the pad....
Does anyone reproduce the D0DZ-2457-B brake pedal pad for the 1971 automatic drum brake cars?
after searching for a lock for the '71-72 aftermarket glove box, my wife has decided that she doesn't really care for it and wants me to remove...
does the early mustang lock fit the smaller hole? Mine must be an original because the hole is small.
Thanks. Touched first probe to one contact, the other probe to the other contact, still no voltage. Unless it is a wiring issue, it must be the...
The sockets on my Comet are metal and attach to the plastic taillight housing. I held one lead on my test light against one of the contacts inside...
Separate names with a comma.
