The grommets are now "in the works"... timeframe until release is unknown, but hopefully soon. They will be sold in pairs even though Ford only...
Might have a look here..... https://www.facebook.com/jacks.tachs/
At this time, there are no plans to reproduce those used without belt line trim.
Photo available here, see link below http://dennis-carpenter.com/m/product.aspx?p=D0DZ-6229796-PR
I googled Dennis Carpenter and located his website and saw this at the bottom of the page. On the right side, it gives a phone number.
Dennis Carpenter has received 10 pairs of the new quarter window trim moldings. The next shipment will be in April. They are $129.95 for the pair...
I used them Frank, one ear has to be trimmed. When you hold it beside your original, study each ear on both the old and new socket, you will see...
They do.....[ATTACH]
Th original 2 spoke steering wheel is reproduced now. They are available at Melvins Classic Ford Parts.
Yes they do have a website: www.melvinsclassicfordparts.com And,you can download their Maverick catalog from this thread:...
Not sure how much help this is, but all I vould find.... http://1bad6t.com/Maverick/repair/images/untitled140.gif
An original hood to cowl seal was sent to Dennis Carpenter for reproduction. This is the correct (short) seal that attaches to the cowl. It has...
Soon you will be able to purchase a new shifter boot for the manual transmission. Thanks goes to Dan Hines for loaning to me an NOS boot to send...
The wiper knob pictured above was used on the 71-73 Mustangs built after 5/3/71. There is also a new reproduction wiper knob made for the early 71...
:Welcome: from Stone Mountain, Ga.
Yes, as Chip stated above, it is very possible and he has done it. You can find additional details from his website: www.cameoclub.com Once...
IMO,... you can't really get as good of a repair from the side as you can by removing the entire cowl. The plus side to removing the entire cowl...
http://mmb.maverick.to/threads/melvins-2017-maverick-catalog.111823/
If you replace your plastic knob with the D3OZ chrome plated metal knob on an automatic shift lever, be sure to remove about a 1/16th of an inch...
I am only the messenger
Separate names with a comma.
