Didn't have much time to work on it last weekend..... I did get down to check the collector/pipe clearance to the ground, made a slight...
Heat is the problem..... The first couple rounds or so when there is plenty of cool down(trans/converter) there are no issues..... As rounds get...
It's not that the turbo thing is all that difficult, it is just making bracket racing difficult..... I was considering the Holley display, but I...
Today I removed the ECU and all the gauges..... I didn't want to do any welding on the car with the ecu hooked up, plus I am going to sell it and...
Yes, and probably nitrous.....
Mocked up the trans case and some heads yesterday..... Also put the intake on so I could test fit a coil pack bracket assembly I made for the...
I did get the finally get the new gear set up over the weekend..... The problem with polished gears is they are very hard to read the pattern...
Nice upgrade!!!!!
Today I actually worked on my some..... I got the rear end all apart so I can change the gear set..... [IMG] [IMG] [IMG] [IMG]
It's been a while, but here's a few pic's of the 6.0 I acquired..... [IMG] [IMG] [IMG] [IMG] [IMG]
Thanks!!!!!
Just was not consistent leaving when time rounds starts getting short..... If it doesn't leave consistent reactions times are hard to control........
[IMG] [IMG] [IMG] DO OVER!!!!!
I did get back to the track on Wed nite..... Made 3 passes getting more aggressive with each one..... The last pass was the fastest, it went a...
All back together again..... Drove it to work today for the first time in a long time..... Going back to the track on Wed nite and we will see...
Still slow going update, finally got the trans back together..... It's back in the car but not completely hooked up yet.....
Haven't been doing much on the car, went to a couple swap meets the last couple weekends..... I did get the rear end all back together..... I also...
Thanks…..
I have no idea what's going on with the pic's here, they show when I put them in or go to the edit page but not when they are posted?????
Today I got the new pinion in the rear and put the bearing on the new diff, but I need some longer bolts for attaching the gear to the diff..... I...
Separate names with a comma.
