i just intalled after market power steering bracket and alternator on my motor power steering appears to run off just the crank and alternator...
i have a 76 ford maverick that had the 250 inline in it i jut dropped in a 1968 302 ive been told i cant use my current power steering pump from...
well i got motor and transmission in and sure enough where the stater goes thru the blockplate (snout opening) it is slightly off wich doesnt...
thanks i appreciate it
i actually sold the fmx trans so i gotta use the c4 now
i have a 76 maverick im currently installing a 68 302 the car was originally a 250 cid with c4 automatic the 68 motor was out of a truck that had...
thanks appreciate it
im using the c4 that was mated to the 250....i figured i needed the 157 tooth 280z after i posted my issue i went back out theshop and held the...
good afternoon its been quite some time since ive posted here but i have a dilema im hoping you guys can solve i have a 76 ford maverick wich had...
Used plastic welder to fill the cracks and voids then2 part epoxy. Then applied vinyl using 3m vinyl top adhesive using a lot of heat to stretch...
Got tired if looking at my terribly cracked dash so experimented with afew techniques learned alot avid thrilled with the end result all that's...
Found a rebuild kit carb was full of rust put new power valve and needle and seat along with new gaskets big im No not yet..I just had to get it...
Found a rebuild kit carb was full of rust put new power valve and needle and seat along with new gaskets big improvement but it's at an idle and...
Carb was my first guess to..any idea where a rebuild kit can be purchased. Local parts store is telling me they can't get one
I've got a74 maverick 302 2bbl 63000 original miles automatic transmission cple of weeks back was driving along and suddenly it started acting...
Is there anyone close to Alabama that might have a roof they want to sell I just purchased a 74 maverick with only 62,000 miles on it...
I think the best option is drill thru the frame using a bigger bolt the nuts are welded on the back side of the frame inside the box part of the...
Im putting new bumpers on my 76 and the absorber where it bolts to the frame the welds broke on the inside. .i can easily cut the head of the bolt...
We had a guy come in with plastic pieces to a truck the texture of the panels was wore of prettybad we sanded all the parts with 180 sand paper...
Separate names with a comma.
