After just overhauling 2 c4 trans. 6cyl. trans has a total of 6 clutches 3 forward & 3 low reverse . A v8 c4 trans a total of 9 clutches . Also...
Welcome to the madness
A little trick to removing any pipe thread fitting is to tighten the fitting as little as 1/8 or less of a turn before you try to remove it .
Eli I did a tech artical it is on this form follow the diagram not the text your lights will be much brighter.
Maxx As per wiring diagram run a jumper to both red-ltblue wires you will jump nss . The black-pink is for backup light and you said not needed.
AKA hose clamps
If it's the older style top loader it should use 90w gear oil BUT if it's the newer style trans they use ATF or that type of oil
Wolf Due you have a collage in your area with a automotive program see if they can overhaul for you if you buy parts. My son overhaul his c4 for...
Today was the day for the half price sale 8.8 rear end 3.73 trac lock complete disc to disc with 2 short side axles 2 mini starter 2 throttle...
Is there a hobby shop near you ???? if so go there and get model airplane wheel collar they are available in many sizes and have a allen set screw...
Going to junk yard this weekend for the half price weekend . Witch ford have mini starter ???? and due I have to get a starter of a 5.0 car or can...
With any factory or aftermarket you should install relays . It will increase voltage to light by almost 45% = bright light
Ditto
Allen I used the some a/c set up on my f100. I used both the tensioner and lower idler ( under a/c pump) to stop belt chatter. As for mounting...
just add more info to 1st post . removed cover great shape inside no warn on synchronize and gears
A top loader 4 speed trans and bell housing it's a C4AR- 7006-A with a HEH-G on the tag 64 mustang 260-289 with hurst shifter . wide ratio No...
Bart My son, grand son, and I where there left early gave jerry my entry car not done yet. Hope to see ya next year.
I will be there but the car won't be engine problems
ARP has the stud you need take one your studs out of your rotor/axle take with you to napa or speed shopthey will fix you up
My son just did that very thing on his 64 Falcon using a 64-66 mustang collar . He removed all the shift tube and levers reused the turn signal...
Separate names with a comma.
