Has anyone removed the knob on a column shifter? If so, what's the easiest way of doing it? I'm thinking about replacing the shifter knob on mine.
It exits out the back.
I'm looking for some input on what resonators would be the best for my exhaust. I have 2 1/2 duel exhaust on my 302 with 14 inch summit racing...
What's the best bulbs to replace the dim factory bulbs in the instrument cluster in my '73 Maverick?
Sounds exactly like the issue I had. I set the mixture screws by sound of the motor at idle until I got the "sweet spot", then adjusted the idle...
I'm taking it back to the man that installed it tomorrow.
The wobble on the pulley is like a tire that has a high spot on the tread side which would make the tire jump up and down when rotating. It's not...
I was looking at my 302 engine this morning while it was warming up and I noticed the crank pulley was a bit out of round while turning. Like a...
I bought this set up on ebay for a friend of mine's 65 Galaxie 500 for $275 delivered. 3-core. It's the same size as the one I have in my 73 Maverick.
After installing a 1/2" spacer on my 302 w/600 Edelbrock carburetor, is it a rule of thumb to re-set, re-adjust the air/fuel mixture ? Thanks
Good information. I will pass it on to my friend. Thanks
No rust holes. Just a little trashy in the tank.
I think his fuel tank is salvageable.
A friend of mine has a 1965 Ford Galaxie 500 and was needing a fuel tank. Either a repop or good used one. Any suggestions on where to look ?
Wish I were closer to your location. You'd see me today.
There is an "older" guy nearby that builds old school race engines and also is a wiz with Ford flatheads. I'll be contacting him shortly. I'm with...
Actually the port on the front driver's side of the carb is capped off since the manifold vacuum port on the back of the manifold is hooked up to...
I'll have to try that. Hell, I'd piss on a spark plug if it would help.
Yes. Not sure if the diaphragm was bad back then.
Yes. Edelbrock 1405 600cfm
Separate names with a comma.
