Does anyone have pictures of a power brake pedal assembly and a manual brake pedal assembly? I have been trying to get a good look at a power...
Yes. As far as I know, ADDCO is the only manufacturer of sway bars for Mavericks and Comets.
I cut out the "x braces" on my beater, welded in a sheet of 18 gauge steel, put in the holes for the sub woofers and then welded in new braces to...
When I dropped a 429 into my 70 Mustang, I user a set of shorty headers from Sanderson that were made for a 53-56 f100. Frame rails are the same...
One of the members here, thack, installed front and rear Jaguar suspensions on his car. Bear in mind that he is a master fabricator by anyone's...
Okay, bad news folks. You can't just bolt on a rear suspension from a mustang to a Maverick. There are a couple of reasons for this. The distance...
Technically, you have 30 days from entering the state to re-register the car in California, unless you are in the military. If you pay California...
The kits you see there fits a 65-70 mustang. It will NOT fit a Maverick. The upper control arms will work with our cars. If you had a wild hair,...
Classic Performance Pproducts has tubular Uppers for $309 instead of the $599 most everyone else seems to want. Yes, they will work on a Maverick....
The "Shelby drop" doesn't make the car drop an appreciable amount. The purpose of this lowering of the upper control arm mount point is to...
Consider that on a stock lower control arm, the arm is held in place bya single bolt passing through a sheet metal bracket, the lower controlarm,...
"Something I have heard mentioned a couple times, but not discussed at length is the effect on the structural integrity of the car. Apparently,...
What did it cost to have the tank sealed with Tank Renu?
Nice looking setup. I can't wait to hear the results running. 8-) Silly question about the gap between the exhaust pipes and the radiator hoses....
The opening in the trunk floor is approx. 25 1/4"w x 27 1/2". I have looked for several years and found nothing that is close to a drop in....
That was your car? Sorry about that!!! :evilsmile
http://www.fordmuscle.com/archives/2003/12/efiintake/ Take a look at this article to see some of what you will have to do to make these work....
With this you could buy just the crossmember for a Maverick and make it a weekend installation if you are a good welder. If you try to use the...
Be aware that racing belts have an expiration date on them. If you are racing on an NHRA or IHRA track your belts must be within their...
I also got a 0 in the 40-49 age group. Took about 3-4 minutes total. The whole time, my girlfriend and I were arguing over whether mauve is a real...
Separate names with a comma.
