Those are the Pinto (and Mustang?) decals. The Maverick decals were less than 4" tall. The original decals were still somewhat visible when I...
When I ordered Sprint badge decals online, they sent me a single LARGE decal that was used on the Pinto Sprint -- not sure which one the Mustang...
Everett, IMHO you don't have a compression problem. The engine should run just fine with the compression readings you got. You solved the blow-by...
Took 2 years to get from before to after. [ATTACH] [ATTACH]
Vacuum advance is on the side of the dist. Just pull the hose off and attach your vacuum pump. If the cap is off you can see it move the plate...
Everett, have you checked for leaks in the vacuum advance diaphram? Easiest way is to use a hand vacuum pump (maybe $35?). Pump it up and see if...
I'm having trouble recalling the sequence now, but I used BOTH types to get mine done. Started compresson with one style (maybe the paired screw...
Not real hard. Some of the bolts will go in with the header against the block and some that are under the curved tubes have to be started with...
Doug Thorley Shorties with 347, PS and column shifted C4. No drop bracket for the PS. Shifter bell crank was deleted because the 5.0 block...
Vacuum leak? Maybe from the brake booster or vacuum advance diaphragm? Or PCV valve or transmission modulator? Is the choke functioning...
Check out http://www.fordstrokers.com/ Give them a call and describe your goals and they'll lay out the options for you. If I were doing it...
I put a drive shaft loop in just in case the front U-joint broke. Think you're more likely to break a U-joint than a drive shaft. Myth Busters...
Exactly!!!
I kept it to remind me not to lock the keys in the car but its very annoying when working with the door open. No seat belt buzzer since...
I got a stainless universal hose in the right length, with a 45* outlet, from Summit. Had to bush the thermostat housing up from 1.5" to 1.75". So...
Stefan, Got it. Thank you. Jim
Yes, its all distorted but it has the three 90* bends I need. When its straightened out I think it will fit the F100 with serpentine belt....
Or a Pinto ... :rofl2:
Can someone tell me how to search for a member who's Gallery thumbnail appears in a thread? The fourth thumbnail in Post #3 in this thread...
Separate names with a comma.
