Here it is--------the styling is there:
..........No...........
DVCRobin----Don't let anybody make you think you're getting a cheap paint job at that price. There are thousands of cars out there that have been...
See if you can identify what model carb you have. I have some shop manuals that have photos I could scan and send you. We'll get there---don't...
Still trying--------------
I'd always heard the carter carb just didn't supply enough fuel. Mines a "progressive" two barrel and I just followed the tech article about...
Modifying EGR valve spacer And here's how I modified the EGR valve so I'd still have the right plate to attach the carb. I eventually did away...
These photos are what I used to have. It looked like a bird nest in there. Also shown are how I modified my EGR valve and got rid of lots of ugly...
I wouldn't start on the belt sander like the you tube guy did with good stainless stock, you'd be going backward. I've come close to a mirror...
Here's a couple of photos of what I'm left with after scaling back on the number of vaccum lines, switching to electric choke carb and doing away...
Sounds like you've got a vacuum controlled air diverter (defrost,vents, floor, etc) hung up. It probably got in a "jammed" position when the...
My car has original power steering and I found out the car needed to be running to align it. Pressurizing the slave cylinder takes the slack out.
Zero to Sixty by lunchtime.
I guesss I need to get in on this to. There's a run on plastic window clips!
Yes and no. See all above.
I think you're onto something. I need to remember this one.
I like the "daily dragster" on 2nd page about halfway down. Keystones on the back.
Towing safely and properly will go a long way. I kind of doubt there will be a lot of city driving with it behind.:) And don't tow for a long...
Don't know about the smoke from the carb but by now I'm sure you've taken a look at the radiator cap. Hopefully the rubber or the spring on it is...
Man, I don't know about California emission laws, but I did away with a bunch of vacuum lines on my 200. Pretty much now just running the...
Separate names with a comma.
