I think Krazy means +2.5-3* Positive Caster........ https://opentrackerracing.com/technical/ David
Your D0DA looks like it is a manual pitman arm, the D3DA is power steering pitman arm, the tapers are opposite. So based on the orientation of...
For quicker steering, yes just changing manual steering box for PS box and still using same manual pitman arm, center link etc........ David...
Position both arms so they are facing the same, compare the both holes where the center link stud attaches, are both tapers same? If one taper is...
The Mav/Comets that I have owed with automatics, it was the later years that had the bolt/nut, ones that had the pin/red clip where on earlier...
Roger: The upper water pump connection goes to the by-pass on the Thermostat housing, uses that 90 degree hose. For your Heater core, one from...
Just send both retracters as is to Seat belt planet once you have contacted them, they will do their thing and when you get them back, just a...
With this Covid19 going around, best give them a call and they will have a good idea how long it will take. It has been a few years since I...
Starting in 74, our Mav/Comets had their seatbelt assemble recessed into the rocker panel, having them re webbed by SeatBeltPlanet will allow to...
This was just sent to me, interesting..............
Regarding the axles, all where 28 splined, regardless of 6 or 8 cylinders and all the Fords I have owned, axles that had 3 "holes" in the hub...
Greg: The Center Hub on rear axles where either 2.42" or 2.78" David
Randy: Put me down for a Stainless Steel one, thanks! David
Greg: Here is Tire/Rim calculator I have used many times............
I think that would work better, has 2 pin connector (like on Mav/Comet) on the FG178B, the one on eBay looks like it only has 1 pin...
Hi Frank: You mentioned a 66 Mustang sending unit is same as our Mav/Comet units? So bolted up to our fuel tank OK? If that is the case, then...
Here is the reply I just got from Holley/Hooker........... David, The 6901 is the old part number for 7405 they are the same header. There is a...
Great write up/photo's Greg, that will definitely help other members! David
Yeah, the instructions are both the same for 6901/7405! They must have recently updated the 6901 instructions, since it specifically mentions...
I have just contacted Holley/Hooker to ask the same question! Other members, including myself have used their 6901 series, originally said was...
Separate names with a comma.
