Yes, it does look like the speedo cable and in its condition, looks like you will need a new one, as the metal housing on the end that is inserted...
Rick: They are showing up on "What did you do to your Maverick or Comet today" thread, but not here....... David
You can purchase exhaust gaskets that come in sheets, so you can custom make to your size, should be able to get at any performance auto store,...
Yes, that is all you need to do! You may want to wrap the U-Joint cups to keep them from falling off too and carefully slide the shaft into the...
I remember when I was rebuilding my 390 Toploader, that I came across a few inputs where the snout tip had varying "chamfers" some had more than...
I got these from Ford back in the 80's, I would have to dig up the part number, they where quite common when Ford was still into their "Ford...
Or you can purchase a "stepped" pilot bearing to be used with the 390 Toploaders, this makes up for the difference in length on the shorter 390...
That is the Equalizer Arm (Z-bar), you will have to remove the 2 bolts on the frame, which secures the bracket, once bolts are removed, the...
Try contacting this member, he was looking for a manual set up...........
Some shafts on the automatic where 3/8" diameter and others where 5/8" diameter, so he would have to make sure to get the correct 5/8" one for his...
So you just want to remove the Clutch Pedal and then just install the same Brake Pedal? If so, you would have to use a 5/8" bolt/nut to secure...
Here is picture of Brake and Clutch Pedal assemble, there is a red clip that has to be removed and then Clutch Pedal/shaft can slide out. You...
Here are a couple of pictures of my "modified" bar, I can not remember, but I think I had to lengthened, been over 30 years since I did this! I...
There was a member TOPORANGER who used to fabricate Monte Carlo and Export Brace bars for our Mav/Comets, but I do not know if he is still making...
Here is the original video that was used, this is not what you get for the $49.99! I also found video of the $49.99 air jack, I probably would...
I wonder how those Headers would work on a 351W swap? David
Maybe this one will work?...
Something you might be interested in:...
The taped up metal line, is fuel vapor line, from top of gas tank that connects to fuel vapor charcoal canister (which mounts onto the inner...
Saw these on eBay yesterday, looks to be well made and price is right! David...
Separate names with a comma.
