Hi Frank: Here is mine on my 73 Comet.......... David [ATTACH]
:thumbs2:
On both my 73&74 wiring diagrams, Light Green w/Purple Hash marks (LG-P-H) to A/C Compressor Clutch Solenoid....... David
You can send in your rear retractable units and SeatBeltPlanet can put on new webbing to whatever new color you want, check your units and rebuild...
Here is another company.........many other members, myself included, have their belts. https://www.seatbeltplanet.com/ David
I was referring to the area on the frame cross member where it is buckled, just the torch there, not on the shock itself, do not have to heat for...
As you suggested, if you remove the bumper from the shocks, using a torch to heat up the area that has buckled, you might be able to pull out the...
The cross member/frame has been damaged, you can see how it "crumpled/buckled" where the lower bolt is in the picture and where undercoating has...
Or if you want NOS..............
Do you have the Emergency handle or pedal? If you have the handle, you can use a small screwdriver to pry/release the ratchet tooth away from the...
Here is replacement boot for power steering ram:...
As Mojo (Everett) mentioned, take it to a good alignment shop and have done right........... alignment specs:...
Thanks for the great write up so far! Looking forward to seeing more as you progress. David
sweet! David
I had the same rust issues on my 74 Comet, which had vinyl roof too and you can be sure that "cancer" has gone into the gasket channel. This...
The Mav/Comet rear end is approx. 3/4" narrower (3/8" per side) than the 66 Mustang, as mentioned, same spring perch width, so will bolt in. The...
Yes, that is correct, glad it was just that coil plug wire that gave you trouble, always something simple! Once you moved the plug wires, turn the...
Great you got it running! I had the same problem with my vacuum pod, I ended up restabbing the dizzy, just so the pod was more inlined @ 12/6...
I even tried thread sealer on my chromed fittings, still leaked, only when I removed the chromed plating from the threads was when it stopped. As...
You mentioned it ran nice for about 8 seconds and then quit, could be fuel related or "temp" fix on that plug wire going to the coil? I would try...
Separate names with a comma.