I am using the springs that cam with the AFR heads, they were suppose to be good for the lift I wanted to run in the motor. But with the other...
In the three years that I have had my 347 together it has wiped a lobe on three different flat tappet cams. All have been from Comp, the first was...
I have an x-pipe and exhaust cutouts on my car, so there should be no problem putting just an x-pipe on your car. I have pictures from underneath...
I had to download autokrafter's catalog for Mavericks and they had the part number listed there (380478S).
I am trying to find the hood to cowl/fender bumpers, the round ones that go at the very back of the hood. I have searched autokrafters and can't...
No trim...
Got mine today and my car is together but I am in Iraq right now so it will have to wait till I get home before it gets installed on the car.:(
Email sent...
another thing to consider, the factory z bar didnt fit with the headers i used on my car. i could have have probably taken some off the z bar and...
I have hedman long tube headers with a toploader, I also have a lakewood scattershield that can use either 157 or 164 tooth flywheels.
I also had to clearance the upper brace on my car for the shift linkage and I am using a competition plus shifter.
I used the 65-66 kit.
I have 15x8 with 4.5" backspacing and a .5" spacer. I run a 275/60 with no rubbing at all.
Here is my fav from 09
http://mmb.maverick.to/attachment.php?attachmentid=25743&d=1204667916
What is this winter you speak of?:evilsmile
Separate names with a comma.
