wheel well Its screwed in , very easy to get out.
rod You need to change the shift lever in the trans for a stock floor shifter.
Hole oil pump pickup tube, early bronco,or van.
water pump The timing covers are not the same, you can put a spacer behind the water pump pulley and it will work. or change the timing cover.
msd The Ballast resistor is need to keep from burning up the points. The stock coil has the resistor build in. You can still buy a points coil at...
paint The SEM stuff is good, just clean good it will last a long time. It comes in spray can. The trim black is low gloss looks like new
paint I used SEM trim paint on the hard plastic.
rear end Strange has deal on 35 spline axles and spool. I am building fox body drag car for guy now, got a good deal should last a long time
alternator harness If you are talking about the small harness that goes from the alternator to starter solenid and reg. I used one off 71...
Headers I have the 88300 Hedman long tube fit good, I have no problems with fit. All long tube headers have to come off to change the starter.
Display I have three, maverick, dragster,and indy car.
display It was gave to me, I'm going keep it.
Fuel sender Try autokrafters.com They should have all you need
Has anyone seen this before?
Self Etching primer is what you are talking about, It has acid and zinc. It is used on bare metal. You can get at a auto body supply store.
title You can go with broadwaytitle.com. It will cost 200. or more.
That is the way that you learn, its ok
I think he did not change dis.
Yes, You have all the wires wrong, this is your problem.
engine If your engine runs ok now, I would put alum intake,600 cfm carb. set of headers and dual exhaust, And ride it.
Separate names with a comma.
