95 mustang engine with 49k on the clock for $150.00 GT40 heads from a early 97 explorer $50.00 Milled down .020 and vacuum tested $85.00...
I might have a brown one you can have for the shipping price. I'll let you know tomorrow.
I'm running fuel injection with Gt40 heads and intake. I use the Moates Qurterhorse to tune it. The #1 reason for my EFI setup is no mater the...
I have a few lengths of different diameter exhaust pipe that I use to get seals started. Hasn't failed me yet.
Any time I have to remove a engine or trans I always replace the trans seal. If the engine has a 1 piece seal I replace that also. $18.00 is some...
yes and yes
You would need to drill + tap holes for the spider and use a small base circle camshaft
There is no difference in the block as far as engine mounting. Are you using the fuel injection? Here is my Explorer setup. [IMG] and...
Here ya go. At the track running the factory hubcaps and 185/75/14 tires. I ran a 14.34 with a 2.47 60" time from spinning those little tires....
I'm running a A9P ford EECIV computer with a explorer intake, modified throttle body, 94 T-Bird MAF and 24lb injectors. I use the Qurterhorse...
That is the vacum storage canister for your AC. It might have rotted out and was bypassed.
most guy's I know that run a C4 built for racing use tractor hydraulic fluid. It comes in 5 gallon pails and is normally used in dozer's, front...
just talked to the guy. It's out of a 70's era car. O well.
dont know yet. It's on craigs list and only says rancharo. I'll email the guy.
will a rancharo 9" rear fit in a maverick? If so what are the major differences?
So if I get 1X" X 8" with a 4" back space I should be ok? An example would be 245/45/17 with a 4" back space should be ok.
I was just thinking this same thing only I need to know the backspace and offset. As much as I like the sleeper look with the 14s and hub caps I...
Those wheels look so 70's! but I like em.
A battery will freeze after it is dead. whether it brakes or not you do not want to recharge or reuse a battery that froze due to the plates...
I'm running GT40 heads that I had milled down .020 . When I had them on my cougar they made a noticeable difference compared to the E7s that were...
Separate names with a comma.
