Nothing is loose or bent, and the boot looks nice and solid.
I replaced the outter tie rods on my daughters Merc. Tracer and took it to a local shop to get aligned. They told me that a inner tie rod was bad...
I just swapped the fuel filter and took it for a spin. Runs much better, doesn't want to die, although it does seem to hesitate when I step on...
It starts up and seems to idle fine and does fine on the few corners I've been on.
For the last 2days my Mav wants to die whenever it pulls away from a stop. I put a reman. carb on a few months ago and it has run fine until...
Thanks for the info.
I am driving my uncles dodge pickup and there has been a small spot of anti-freeze under it every time it has been driven. All the hoses are in...
It doesn't have any problem at all when the tank is full. I just filled up today and took the same turns and it didn't die.
I have a 93 mercury tracer. When it gets down to about a half tank of gas it likes to die when I take a hard right turn. No problem on a left...
I bought a rebuilt carb on ebay. Put it on, had to adjust the float, runs great. Thanks everyone for your help and advise.
I took the carb completely apart. There was a little bit of crud inside float bowl. The diaphram looked good, so I cleaned everything and put it...
Is this something that carb cleaner would fix, or will have to rebuild the carb?
I checked the carb gasket as described, and it seems to be good. I also noticed that I had some black smoke out the exhaust. Don't know what that...
My Mav started to run rough a few days ago. It feels like it wants to die when it is at a stop. I checked all the plugs, plug wires, cap rotor,...
Thanks. I think I will try the Rislone.
I believe that the lifters are making noise. 250 6cyl It quiets down when I let up on the gas but never goes away. Can these be ajusted? Is it...
So does my 76
Can anyone tell me where I can find a fuel sending unit for a 76 Mav.??
Got it sanded and primed today. Doesn't look too bad.
Separate names with a comma.
