What about his valve springs? Couldn't too much pressure wipe a lobe regardless of assembly lube? Were all of these cams with the same heads and...
I didn't replace my rear springs (they're really expensive) I just replaced my rear shocks. Don't know if they still have the kit I ordered,...
Yeah, if you just click reply then scroll down to additional options there is a manage attachments button. Click the top browse button and find...
Don't know if you're attached to the MII gauges, but I replaced my gauges with Autometer. A lot of people here on the board have done so and...
Welcome! You've definitely got enough to keep you busy throughout college! I got mine while in college as well, and although it was in much...
I forgot about that! I had to file down the top of the caliper on one wheel, but only maybe 1/32" - 1/16"
I'm running 14x7 on the front and 14x8 on the rear. No clearance problems on the 7" and I probably wouldn't have a clearance issue on the rear if...
I'm not positive, but I think the bellhousing from any Ford originally equipped with a V8 and a 3 or 4 speed should be the same or very similar....
My original one. I did just like the Mustangs and Fords article and drilled the holes to match the adapter plate from California Pony Car. The...
I'm just finishing up my project reusing all my original mechanical linkage. Mustangs and Fords has a great article on it....
After reflecting, I installed a new Comp flat tappet cam and i'm pretty sure it came with new hydraulic flat tappet lifters. So matching the...
I know this thread is a little old but I have a few questions. First I recently got a motor running that I had mostly assembled over a year ago....
I looked at the Spintech mufflers but when I spoke to them and flowmaster they both agreed that having the curve outside the muffler would make a...
not sure on pulling it, but I couldn't tighten down my headers until I had the trans fully installed b/c of interference.
My friend works at an exhaust shop and he spent hours getting those bends right. Can't knock him for not getting the sides exactly the same since...
As you can see the first bend coming out of the mufflers are mandrel bent. The other part obviously isn't but I don't think those bends are any...
Thats really cool man. I just got my Comet running on Saturday and I know how pumped you are. The open headers scared my dog so bad he hid under...
Speedbleeders work well for me. Easiest way to do it by myself. Forgot to use a hose on the first caliper though and coated the wheelwell w/...
HEY!! Have to do!?! What's that all about?:D Actually these are side pipe covers, I'm running regular dual exhaust but with a funky curve at the...
Bad News!! Fun Ford has been rescheduled for June. http://www.atlantadragway.com/apcm/templates/news.asp?articleid=27901&zoneid=34 I would love...
Separate names with a comma.
