Yes, this is a swap. I am putting in a 302 with Hooker headers 6901. I need to know what I need to know about availability of a V8 linkage and...
Hello forum! As I was lowering my newly rebuilt 302 into my 75 maverick to bolt up against my newly rebuilt c4 I came to a stopping point and the...
Just uploaded the pictures, ignore links. :)
Sorry about the picture links. Hopefully, these will post and I won't need links.
Hello, Forum. I have been through most of the threads on alternator brackets and can't seem to find what I need to help my situation. I have this...
Hello Forum. I have been through most of the threads on alternator brackets and can't seem to find what I need to help my situation. I have this...
Gotcha! I rebuilt the UCA and they are centered and I had angled zerts but when I put the UCA in I had no room to get grease gun on fitting. Went...
That sounds right. I plan to loosen the LCA eccentric. As well as the UCA outer bushings. My question is how do I torque the UCA bushings after I...
Perches are inboard for end of coil spring. I was told that was correct?
Everything moved prior to putting coil springs back in.
I torqued UCA bushings to 35 ft lbs. Yes Stock Springs just sand blasted them and put a new coat of paint on.
Okay torqued down everything to spec now my new front end is locked solid. Won't move. What did I do wrong? New LCA rebuild UCA new sway bar...
http://www.ebay.com/itm/Ford-Maverick-1975-1977-Front-End-Suspension-Rebuild-Kit-Performance-Rubber-/331655118894?fits=Year%3A1975%7CModel%3AMaveri...
Could my spindle be worn that much? The place on ebay guaranteed high quality parts no foreign off shore. Maybe I got had.
I just replaced the lower A arms on my mav, and when I looked at the torque specs for the ball joint to spindle it says 60 ft lbs min. When I do...
Can I use the serpentine set up (pulleys) that was on my 1988 donor in the rebuild?
Okay, maybe I should provide a little more information. I have a 1988 roller cam 302 donor, putting it in my 1975 maverick. We should have...
Okay, my son and I may have purchased the WRONG water pump. I purchased this one. https://www.summitracing.com/parts/fms-m-8501-c50 I believe it...
@JOEXR793 I see in the photo spot welding the floor in. Do you leave the old floor in or cut it our completely and spot weld the new one to the...
@junrai Did this go through? If not, what do you want for your 1/4's? I am in need of two back quarters for 2 dr sedan 1975. Interested if not...
Separate names with a comma.
