Front wheels will eventually be 15x3.5 Fenton Gryo wheels to match the 15x11 back Fentons. Figured I could use these front wheels to roll it...
Couple pics of the whole car. Headed to the frame machine tomorrow morning to pull the "puckers" out of the rockers before I put the subframe...
My guess is that's carb flow, not port flow. We ported the intake side to take a 1262 gasket but it gets really tight around the pushrod tunnels...
Pull your dipstick and hold a lit cigarette lighter under it and light the oil on fire. If the oil burns clean, there is no water in the system,...
We've raced these heads on dirt stock cars and modifieds before the aftermarket heads were available. We prefer the 64-65 heads. Never waste...
Look at your harmonic balancer. They sometimes let the ring slip on the hub with age. If the rubber is badly cracked, oil soaked or missing...
Doesn't come off as smarta$$ at all. Maybe my question is not fully understood. This is a custom made rearend. It's not taken out of anything....
Tires are M/T 29/12.50x15 Sportsman Pro mounted on 15x11 Fenton Gyro wheels. They fit and clear all the inner fenderwell at this time. Once brake...
Going to look at the leafs closer. They have been changed and maybe they didn't center the front bushings when they were put together. It's not...
The spring pads aren't even tacked down yet. So far everything is just clamped until I get the tires centered under the body. Right tire sticks...
I just put a 9" under my '70 Pro Stock "tribute" car. It's centered on the leaf springs. Exact same measurement from end of housing to edge of...
Picked up the new rearend yesterday. 55.5" wide, 5 on 4.5 bolt pattern, new style big bearing billet housing ends, 1/4" wall tubes, 3" studs, all...
Get used to it. I find a lot of posts that look like these came from a phone. Punctuation and sentence structure are forgotten art forms now. SPark
Unless you are running a big stall converter and spending a lot of time idling, you don't need a cooler fan unless you bury the cooler completely...
If you had 4 distributors that the advance didn't work, you may have been trying to pull your vacuum from the wrong port or had a bad vacuum line...
I've been using Pretronix on my last few street rides. Will use it on my Maverick "Pro Stock" also. Work great. If you get a cap for an...
I've been reading this from the beginning and posted a couple times with suggestions myself. Sorry, but I have to rant, be patient please. I...
If it's just dirt and gas stains, try a caustic mag wheel cleaner. Not the "good for the environment" stuff, you want the nasty stuff that stinks...
Check out Speedway Motors offerings. They make several, the glass is thick and the finish is good. SPark
It really depends on the "look" you are going for. Road racing? Then the Mopar T/A scoop isn't a bad idea. IF it's drag racing, decide the era and...
Separate names with a comma.
