makes sense... I kinda figured the late model mustangs used the flange type end. ill probably be better off spec'ing one from ie.
I've had pretty good luck with the rust destroyer at the shop. I had quite a few rough spots on a 59 thunderbird that sat in san fransisco for at...
so I've been slowly getting the back half of my drivetrain together in the comet, and one of the last items to check off the list is a new...
start collecting the swap parts now... that's the hardest part. some pieces are repopped now, but not all of them, and the ones that are tend to...
true story...
I shelled out for a set of new wheels this morning... expect pics in about a week and a half.
my 66 mustang was still on jackstands at home, and I needed to find an alternate form of transportation. one day while working with my dad at his...
no, it won't, but the old ford dizzys are pretty easy to blow apart and rebuild. its way cheaper to throw a pertonix in and rebuild than to buy a...
the bearing is a national wheel end components part no. 100-cc4. its a federal mogul/moog company. you have to massage the z bar and the pivots...
I used the I6 piece from the pedal, and made an adjustable rod to the clutch fork. its pretty easy to make the lower rod. also, if I can find...
all of the cars we do in the shop get a pertronix flamethrower if we keep the ford dizzy, otherwise we run the msd pro billets. the pertonix unit...
dang, its been a while since I posted on here... I got the ball rolling on my 9" swap. the ranch wagon housing, new posi, and the new reverse...
So my amusement with the oddball Torino disc brake conversion has worn off. I made it work, had a ball, but it's time to get serious. The next...
after taking a short hiatus to finish getting the 4 speed situated, and a few more pieces into the engine compartment, i was able to play around a...
in that case, you may be in the same boat as me.
i was offered the option of a 10" or an 11" when i called the parts house and ordered one. the 86 5.0 truck clutch and pressure plate also work...
fwiw i'm running an 86 F150 flywheel with a 72 comet 11" clutch between my 5.0 and my t10. the only difference between the 72 11" clutch assy. and...
i just tried to buy a set of bfg 33x12.50x16.5's, and ran into just about the same problem. everyone i've talked to is saying there's a 6 month...
this is by no means a definitive answer, but the AWD ford aerostars came with an aluminum driveshaft that is commonly used in fox platform...
that's exactly what i was looking for. much appreciated :Handshake
Separate names with a comma.
