I'd be interested in knowing if he intends to get rid if it and for how much. I never hear the end of it from my daughter fro getting rid of my...
Since your in my neck of the woods, any suggestions on a "good" Maaco shop? I've got a beeter F150 that needs paint and the local Maaco here...
Wow, blast from the past...As par as I know he lives in NY.
I saw one last Thursday, in the Tullytown area. Gold 73 from the looks of it, in really good shape.
There's a 74 for sale by me that is close to that Antifreeze green with blacked out bumpers and trim. It's bright and you can't hide form the cops ;)
Your just a LITTLE further away than I was lookign to travel to pick up a car:rolleyes:. Haven't been to SoCal since '95.
unfortunately I sold the Mav last year, which is why I'm looking at another this weekend....
It's gotten to the point that when I go into the local Pep-Blows I just walk over to the computer, spin it around and look up my part, then tell...
The p.o. on my 76 had run air shocks and they blew right through the floor. I used 1.5" square tube, 1/8" wall and some metal plates to build a...
NO! the 65/66 upper arm bolt spacing is 3 5/8", the 67 is wider. They are at most 1/16" shorter...
Actually you may be able to use the 67 upper arm as long as the bolt spacing matches the Mav's. I'm not sure that you'll gain that much camber...
65 to 67 Mustang upper arms are essentially the same length, the difference is in the bolt spacing. It's wider for the 67 to 73 arms. I believe...
The C4 might not be a direct bolt up. I'm running a 97 T5 from a 3.8L Mustang in my 66 Mustang with the 3.8 bellhousing. The flywheel for a 3.8 is...
I agree with that. Any primer is better than bare metal. The problem I've had with rattle can primer is when it comes time to actually paint,...
PLEASE, don't use rattle can primer:naughty: I know it looks good when it's done but it won't hold up for more than a few months and primer is not...
YOU WAS ROBBED:biglaugh:Sorry couldn't help it.... I bought the dizzy for $38 & change and the box for $19.99 last summer. Damn that's a hell of...
Find a later Duraspark dizzy and box (@$60 new for both at Pep-Blows) out of an 80's Farimount/Granada with a 200. Pretty much a bolt in with a...
If you have a 250 six a T5 should bolt right up with the correct parts (flywheel, clutch, etc..) The 250 had the same engine to trans bolt pattern...
I just did the 1" drop on my 68 Cougar (which is essentially the same upper arm as a Maverick) and have done it on my Mustangs and Falcon. It...
If your up for it, I was going to head there Saturday. Gotta find some small part for my 68 Cougar and I know they have (hopefully still have) 3...
Separate names with a comma.
