Day 2.... I got the C-4 and all its components out. First time I dropped an automatic. I wished it a good day after putting in my back yard. I...
Last night I per-assembled the pressure plate to the flywheel and noticed there weren't any dowel pins in the flywheel. So I spent the morning...
Thank you Dan. Great input, when I finish with the swap, I'll put together the list of parts and part numbers. Thanks, Ken
Yes, the Lakewood scatter shield is for a clutch cable. I am using a 5.0 fork and clutch. This is where I bought my transmission and the rest of...
Hi John, I am using Hurst Competition/Plus Shifter P/N 391 3180 and Installation kit 373 5587. If you send me your email address, I'll send you a...
Thank you for all your help. The thickness of a 300 flywheel became a concern, I decided to buy a FMS 302 0 balance flywheel, ZOOM 10 1/2" mustang...
Thanks Rusty, I just looked up the transmission on David Kee's site. My trans is a RUG-E which is a 1967 289 transmission wide ratio. The input...
I'm sorry I wasn't clear. I am keeping my 250 I-6.
Toby, the 300 flywheel is correct, it is a zero balance flywheel. Mercgt73, what is the length of a input shaft I need? I know there is a...
Next weekend I plan to remove the well worn C-4 out of my Maverick and replace it with a Top Loader 4 speed. Here is my parts list, (these parts...
Paul, The idea is different, no one else is doing this. OK, I have also done the math, I am trying to build a hot 250, ok if 3 carbs is too much,...
Paul, These carbs flow about 180cfm each. On the Primary side, with all three carbs open, that should be 270cfm, then at 3/4 throttle the...
3 1bbls are getting common, this is a 3 2bbl set up. I have 3 progressive 2bbls mounted here with a non-progressive linkage. I am having fun...
I've added a new picture that shows the linkage hooked up. http://my.opera.com/kat4568/albums/show.dml?id=4969252 The final linkage will be...
Thank you for the great pictures. Please post more, I really enjoy looking at your cars.
I know there are a bunch of Mavericks that have Boss 429 hood scoops on them, I am thinking about adding this scoop, due to adding 3 2bbl carbs on...
Tyler, Go to this Ford 6 site and ask questions about your engine: http://fordsix.com/forum/ Also, here is a great reference book for hopping up...
maverick75, 300 rods won't fit a stock 250. The 250 rod is 5.88 c/l to c/l and a 300 rod is 6.2 c/l to c/l. the stock compression height of a 250...
250 water pump has 4 fasteners a 144-200 has 3.
I have been playing with a D7 250 head. I have added 3 Carter/Weber progressive carburetors. The carbs are rated at ~180cfm each or a total of...
Separate names with a comma.
