you was right !! It was the starter all along i tried my spare and it was bad also i have a good one now that spins over very well Thanx for all...
thanx for all ur help i greatly apprciate it lots!!!!!!!!! i am gonna redo my battery cable ground this weekend nd double check the engine gound...
the 12 guage starter wire is attached to the big post on the I side .is this right or wrong? should it be on the littel prong on the I side
ok here we go. i have the 2 guage cable running from the trunk battery connected to the switched side of the solenoid which is the left prong...
of i forgot to tell you the cable running to the battery in the trunk isnt 4 guage its 2 guage i think.its huge and came with the trunk kit ,the 4...
i think i might have the ignition switch wire on he wrong side then! you say it needs to be on the ignition side of the solenoid? IF so im pretty...
i have a 4 guage wire hooked to the big plug on the strter to the switched sid of the solenoid and the small prong on the starter has a 12 guage...
the engine is a 302 and the starter i had gotten used from a local friend who stock piles ford parts the starter is the new mini style wit the...
no i dont . which battery cable do u mean?
thanx for the advice, i will try mounting the battery cable to the frame rail
i need help guys ,im trying to get my 70 mav put together ,1st of all i used the late model starter .i have it wired the same way i saw it in the...
i will do some more checking, i think the 2 local shops dont wanna really check around for me ,ill find one then thanx guys.Mine jus thas a few...
where is a good source for a new windshield ,seems alot of local shops cant find one
so if no blocks after 92 cam with flat tappet cams ,then why is my block stamped F4 which i thought would be a 94 block ,it doesnt have the bosses...
so are you saying the mountaineer had flat tappet ? if so its probably a low torque cam
did u purchase the 24" cable? and did u have to do any cutting to fit? is ur car a 70?
has anyone used the lokar throttle cable on thier maverick and did it work well for you?i have a 70 grabber doing the v-8 swap and the throttle is...
i bought some gauges at the swap meet a few wees back new in box hooking the voltage gauge up where is the best place to wire the positivewire up too.
thanx for the help.I just lik to be for sure .when i took the spare yolk out to install the drive shaft some fluid leaked out as they always do...
guys i found that the rubber dust cover thats sticks out around ur driveshaft right behind the rear tranny seal has a crack .Will this leak or...
Separate names with a comma.
