is there any differance in effort between the power steering box and the manual box besides the lock to lock distance
thankyou for the replys I didnt know about the swimming motion. Havent evn considered that so far it is 3-0
I have both setups and cant decide what to run. What is the main differances in drivability and power. I know most will say run what you prefer,...
yes i looked at the kit on ur link. I was wondering if i could put the newer 11 inch rotor from a granada on the 74 disk spindles which I believe...
I have found a 74 maverick spindle setup and im gonna have to replace the rotors and calipers. Can I buy the rotors and calipers for the later...
which spindles did you use
www.ultrastang.com Been looking at doing a big rotor setup and wanted to see if anyone else has dont it. I have a 74 maverick spindle setup,...
Joe Dirt Did you notice a big differance or was it only a slight change.
thankyou for all the info. Im gonna go ahead and try the cable route as I already have the stuff. I will weld a reinforcment plate to the back of...
your probably right. Im gonna use a cable and quadrant out of the 86. Found some kits where you weld the quadrant to the pedal directly. I was...
has anyone converted a automatic pedal assembly to a manual by adding a clutch pedal. Not looking to buy a unit tryin to get a cheap way out. I...
do you think a trash bag and spray foam may work. Seams like it may be light weight and fill the hole a little batter.
Will a 99 expedition 4wd rear caliper brackets work on our 8 inch for a disk swap
i have a friend with a set on a 408 he ran a 10.6 at 128 in a daily driver 89 mustang i think he may have had the bigger version tho. Would...
thankyou very much for the info.
I have a 73 maverickthat has factory v8 power steering, air conditioning. im replacing the engine with a 87 roller engine and Im gonna use the...
i ran a set of the protoplines on a 408 I had. they made good power.450hp/475tq to the wheels running 9-1 comp and a 750 holley.That was running...
shoot me a pm if you dont find ur parts. I have a 73 with air. only have the inside parts not any of the parts in the engine bay
Separate names with a comma.
