my c4 on my 302 has a 2-3 flare only under heavy power. Is it possible that this is a modulator issue? i recently rebuilt the c4 (less than 1000...
i have the hooker 6901s on my 302 with a C4. Had to convert to floor shift and had the have the headers modified. The pitman arm was coliding with...
Hey i have an 8.75 inch rear end on my 5.0L maverick. been researching the availability of varried differentials and have read in a few places...
alrighty ill switch it out and see if anything improves.
Hey everybody! been a while since i posted. been busy with college and my studies. But i finally got my 71' 5.0L swap road worthy and took it down...
On the topic of rebuilding the C4, i got a DVD from "Bad Shoe Productions" that walks through rebuilding the C4 from the valve body up and it only...
I used a crossmember from a 77 Granada. Although the holes did not line up perfectly for the tranny mount i was able to re-drill some holes. Fits...
I use the 6901s on my 71 5.0L. However i had to have part of one of the tubes cut and re-routed slightly because my pitman arm (i think thats what...
It is a one piece seal. Yes I did use thread sealer on the bolts. And I do believe it is the correct flexplate.
I replaced the rear main seal once but it seems to still be leaking. What brands do you use? Of course I installed with some good Ole rtv. I also...
haha sorry, car charger like for a phone!
ill be using it for a car charger. i would never pollute my mav with cigarette smoke!
Thanks. I actually don't have any cig lighter currently in the car but ththese are good ideas and I'll do just that. Thanks all!
correct. I just used the stock pushrod, that came with my new MC. i dont have any pics of the setup but it was just a normal pushrod that came...
i pulled that picture from a posting on amazon. Its a kit for a "universal" application. I assume the extra brackets and hardware are for non...
Thank you! exactly what i was looking for
Anybody know where i can purchase the clips that hold the trim on? when i removed my trim for paint a few of the clips were mangled beyond repair.
Just a few days ago i dealt with this problem. I ended up cutting a little more than a 1/4 inch from the middle of the rod, Threading both parts...
im relatively new to wiring and was wondering if anyone had experience with using a relay to control a cig lighter. I have it currently wiring to...
Could be leaking from the dipstick plug?
Separate names with a comma.
