Whatever.
IMO, if you want the most performance benefit, how tolerable a ratio will be for highway driving should be the least of your concerns. It is far...
I think the 3.80 gear is going to be better suited for your set up than the 4.10.
There are several factors to consider including engine combination, transmission specifics and tire diameter. IOW, the more detail you can...
No problems so far. I do not know of anyone who has broken an axle using their spool on the street and there are many of us here who do (we all...
I largely agree with all that you are saying here. Perhaps I was reading too much into your prior message.
The issue here is that no one knows if he has too much or too little spring pressure. Too little can be as harmful as having too much. You can...
I am no pro builder but: The only way to know for sure is to have a machinist/builder you trust check the spring pressures. See how they...
Disregard my post above and listen to what Mavman has said. His explanation is well reasoned and makes much more sense than mine.
Have you adjusted the idle mixture screws properly (i.e. with a vacuum gauge)? If not, proper adjustment can make all the difference in the world...
Whenever I see a Chevy motor under the hood of a Ford, I just walk away. Got no interest in such an abortion and do not want to risk giving the...
If it is lean off the line as Rick suggests, you can experiment with weaker secondary springs. Certainly not as good as a double pumper but you...
We're driving back from GA that weekend and plan to stop over for awhile. Since I don't know what any of you look like, I'll keep an eye out for...
Locktite will probably not last very long. You should throw the nuts away and invest ~$30 in a set of poly locks.
I had the old "Will Burt" highports on my first 351W. The new one will have the "R" heads. Both have raised exhaust ports but the old TFS ports...
Unfortunately, the TFS heads have a higher exhaust port than the Edelbrocks so I do not think they will work. I would check with any of the well...
It will be impossible to find "off-the-shelf" headers for your application that are larger than 1 5/8" primary tube diameter. I have been through...
Thanks for all the compliments and well wishes. I'll try to answer all your questions. Dennis: My plan is to make the Round Up this year...
Well, I could not sell the car for what I needed to get out of it so I have decided to keep it and get it running again. My latest investment has...
Overheating can be a cause of a blown head gasket as well as a symptom. Although not necessarily the culprit in your situation, my point here is...
Separate names with a comma.
