i am needing a hood scoop for my hood since i put the 351w in and i cant get the hood to shut with an air cleaner now, so im gonna have to cut a...
i have tried them on other cars before with the afb and they have all needed a spacer under the air cleaner.
how did you route your spark plug wires? mine are a mess and i want to make the engine bay look nice and clean but i just have a mess of wires...
well i might be going with a hood scoop, i got a line on a mustang cobra one. then i can just cut a hole in the hood and be done, if i go with the...
i dont have anything yet, my last maverick was a 73 and when i switched from a 2brl manifold and carb to this setup i have currently with the...
anyone that is running a 351w in a maverick what did you end up doing for an air cleaner? mine dosent seem to fit.....i have a 71' with a stock...
well i pulled the pan and pump today, i installed the dizzy then the rod and pump, got it all back together and she runs beautiful now, now just...
well i wa gonna install it today and afterlooking at instructions on the edelbrock site i appear to be missing a cam btton and a brass washer, so...
i have a new noisy gear drive i just got in a trade, what are your experiences with them? hard to install? annoying? any pros or cons? thanks
the machine shop did relieving in the flat-tops, originally i had a lunati cam with .5 something lift that was gonna end up being too much for...
i also forgot to mention that this is a motor from a 74'LTD if that makes a difference, and this is a complete rebuild, and the heads both have...
the rocker arms are stock 5/16 pressed in stud, cast iron rockers the distributor is a 1969 351w from a mustang points ignition, if i ever get...
can someone tell me why some of my rockers can be torqued like they need to, and the others have to be adjusted with the stop nut? i can see if it...
this is the cam i am running http://www.cranecams.com/?show=browseParts&action=partSpec&partNumber=443901&lvl=2&prt=5
i am wondering if there is a problem with my cam? all the problems with my valvetrain and now the distributor gears, i am wondering if i got a...
Any ideas what? i refuse to take this thing to the mechanic, it is personal now, and i want to figure this out myself!!!!
ok well i installed new pushrods and used the above mentioned trick with the stop nuts to make them adjustable, i checked compression and all were...
ok well i cant tell for sure but looking in the gallary and i may have installed the bract to the head wrong.....that is where i am having...
i need to see the clearance between the bracket and the wire connections on the back it is a manual car...no ps.......also i havent got the alt...
can someone post up a pic or email me some pics of an alternator installed on a 302, i really need to see the backside i am having clearance...
Separate names with a comma.
