it was the intake side, the heads are newly rebuilt, how can i check to see if the valve is bent? i ordered a new pushrod,lifter, and rocker arm i...
Well I Pulled My Intake Off This Weekend To Get The Broken Bolt Out And Found One Of My Pushrods Jumped Off Of The Lifter, Why Would It Do That?...
how can i lock my hood? i have a lot of money invested in my motor and would like to have peace of mind in my crappy neighborhood, is there...
it was running bad before the pop, then after it is fine now. the carb is off of my daily driver and it was running perfect. i guess i will just...
ok well i have been working onmy motor for awhile now off and on, this weekend i finally got a welder so i could weld up the exaust, i had blew a...
i am wanting to put a hood scoop on my maverick, could everyone that has them post up with any advice, and if they are happy with the quality, and...
i need to revive the paint on my maverick, it does not have a clear coat and i was gonna use some rubbing compound to try and get most of the...
[img]I HAVE THIS INTAKE AND A 600CFM EDELBROCK CARB ON IT AND IT SEEMS TO HAVE A VACUUM LEAK AT THE BASE EVERYTHING IS NEW, AM I SUPPOSED TO HAVE...
thats what i thought too, i put a mechanical gauge in and confimed my electrical gauge is still good, i guess i will pull the oil pan and install...
my head gasket blew, i have a nasty sludge in the engine now from the water and oil mixing, how do i flush it out? i used ROL gaskets and the...
what is the best way to flush out a motor that had a blown head gasket? by the way ROL gaskets are CRAP!!!!!! i blew a head gasket during...
Everything is chrome and painted, i just bought it and installed a new cam and timing chain, i have no idea what the timing should be!, i got it...
anybody???
does anyone know what the timing should be set at for a 1978 ford truck with a 400m? also what oil pressure range should it be in? thanks
there isnt really a cover, the chain is recessed iton the block and it has a flat steel plate that goes over that
i have a 400m in my 1978 4x4 truck it had a faint knock to it around 2500rpm or more, and a bad vacuum leak, well after about 2 months of dealing...
i have a 4x4 ford f-150 with the 400m in it. i dont know anything about these motors has anyone had experience with them? good or bad? i bought it...
Valve Lash? im kinda dumb when it comes to all this, can you tell me step by step how to adjust them, they are hydraulic lifters Thanks
:slap: I am putting together my 351w its a 74 with the pedastool rocker arms, i have been told i just torque the nuts down to 20lbs, does that...
I am needing to get it running by tonight, i dont have time to wait to get a bolt kit, i just need the timing chain cover bolt sizes so i can get...
Separate names with a comma.
