How can I tell if a cylinder head supports the air injection system? Can a head be drilled to support it? The reason I ask is because I noticed...
Thanks for the advice. I think a gear change would be a good idea.
The cam I am planning on using is the same as the edelbrock 2122. I was going to try to use the replacement cam for the 84 GT but as in earlier...
Thanks for all the help and advice. All of it will be useful when trying to consider which route to go. Right now I have the stock '77 heads on my...
My current compression ratio is 8.4:1. I need to reduce my combustion chambers about 3.3 cc. Also remember in '77 they used the 351W heads and...
I have the 302 in my car, and I am planning the rebuild process for my engine. Does anyone know whether or not the port and polishing of the...
Do I need to wet sand it or how do I do that? Also I took mine down to where it was black (the original material i assume) and I still noticed...
Well what I noticed was that as soon as i removed all the paint, the piece of rubber was extremely flexible. Heck I could drap it over the fence...
Well thanks for the info. Maybe the performer cam would be a better choice. Hmm, the only other concern would be gas mileage. Will it effect it...
Thank you very much for the advice. The cam that I would like to use is not a roller cam. Actually the reason I chose this particular cam is...
Maybe I can help with the motor mounts. I'm pretty sure the blocks are almost the same so when I get my motor mounts, I am going to get them from...
I have a 77 302 engine. I have been doing research and found that the major differences between my engine and the 84-85 302 is the carburator,...
I am planning on doing a fairly similar process to my car. I am going to rebuild my engine with the 83 parts. I already bought the carburator and...
Well as far as the vibration goes, I am hoping its my mounts. I looked at an 84 t-bird that my friend owns (the 84 t-bird engine is almost exactly...
they do look nice. Have you moved them yet? Just out of curiousity because I moved mine and little cracks came about but when i put it back in...
I have a 77 ford maverick with the big bumpers. I am prepping the car to be painted and I got to the rubber pieces between the bumper and the...
Well, I am not too sure. I didnt think it was the differential because it is rpm sensitive. However when i rev the engine in nuetral a similar...
A few years back the transmission on my maverick was replaced. Everything still looks fairly new however. I am hoping it will not be something in...
Ya my problem has pretty much always been here. The car is, I guess you could say a handmedown. No body really wanted it except me, and ever since...
With my problem, it is at a little higher rpm. Everything else seems the same though. I replaced my u-joints, but that was for another vibration....
Separate names with a comma.
